Certificate In Marine Warranty Surveying. Module Seven: Heavy Transport and Lifting/Сертификат по морскому гарантийному осмотру. Модуль седьмой: Тяжелые перевозки и подъем грузов

Издание на английском языке
This publication is a training guide for heavy lifting and transport operations. The book covers methods of transporting and vertically lifting loads, calculating mass and center of gravity, the effects of wind, water, acceleration, and friction, trailer stability, ground loads, crane lifting capacity, and lift planning. Special attention is given to slings, beams, and spreaders, load calculations, inspection of lifting equipment, methods of sliding, jacking, and handling loads, load-out operations with SPMT and trailers, as well as project management, risk analysis, production meetings, and occupational safety issues.

Content
1. Introduction to Module 7
2. Introduction to Heavy Lifting
3. Means of Transport
4. Lifting - Vertical Movement
5. Alternative Lifting Methods
6. Centre of Gravity
6.1. Wind force
6.2. Water force
6.3. Accelerations and decelerations
6.4. Friction forces
7. Calculating Weights
7.1. Ratio between volume and weight
8. Essential Information
8.1. Additional information
8.2. Hydraulic Platform Trailer
9. Stability of Trailers
9.1. Steering the trailer
9.2. Pushing/Pulling force
10. Notes on Road Transport
11. Ground Loads
11.1. Ground load for trailers
11.2. Load spreading mats
12. Crane Capacities
13. Lift Planning
14. Uneven Loads
15. Rules for Lifting
16. Hand Signals
16.1. Forces in Slings
17. Stability of The Load
17.1. Loading of Lifting Points
18. Lifting Beams Versus Spreaders
18.1. The Spreader Bar
18.2. The Lifting Beam
18.3. Factors of safety (SWL)
18.4. Tool guide
19. Calculating Loads in Cranes
20. Inspection Criteria for Lifting Equipment
20.1. Safety factors for Slings
20.2. Work factors
20.3. Identification and markings for slings
20.4. Safety factors
20.5. Work factors
21. Skidding, Jacking and Moving Techniques
21.1. Skidding Methods
21.2. Load-out methods
21.3. Jacking methods
21.4. Alternative Methods
21.5. Skidding Techniques
22. Load-Outs Using SPMTS And Trailers
22.1. Moving the load
22.2. Load-out with tidal conditions
23. Recommendations Relating to Movement of Loads
24. Project Planning
24.1. Terms
24.2. Gantt diagrams
24.3. PERT charts
24.4. Critical path
25. Aims of the Exercise
26. Job Hazard Analysis
27. Toolbox Meetings
27.1. Kick-off
27.2. Take-five
28. Last Minute Risk Analysis (LMRA)
29. Health and Safety Issues
29.1. Conclusion
30. Summary
31. Glossary of Terms
32. References
33. Appendices
33.1. Appendix 1 - Specimen hydraulic trailer pre-operations checklist
33.2. Appendix 2 - Specimen heavy lift project form