Operator's manual DI13 PDE Marine engine en-GB 2 291 901/Руководство по эксплуатации судового двигателя DI13 PDE en-GB 2 291 901

Издание на английском языке
This Operator's Manual describes the operation and inspection of Scania marine engines. The engines are direct-injection, liquid-cooled, four-stroke, turbocharged diesel engines. The engines are available with different output and speed settings. The normal output setting of the engine (performance code) is indicated on the engine data plate. Only standard components are described in the operator's manual. Information about special equipment is contained in instructions from the various manufacturers.

Contents
Introduction
Power classes
Environment and safety
Environmental responsibility
Safety
Warnings and advisories
Certification
Engine data plate
Component identification
Starting and running
Checks before running
Starting the engine
Running
Engine shutdown
Checks after running
Inspection
Engines with few hours of operation
Inspection interval
Lubrication system
Oil grade
Oil analysis
Checking oil level
Changing the oil
Renewing the oil filter
Labels for top-up engine oil grade
Parts
Cleaning the centrifugal oil cleaner
Operational testing
Cooling system
Coolant
Checking coolant level
Checking the sacrificial anodes
Checking the sea water pump impeller
Checking antifreeze and corrosion inhibitor
Antifreeze and corrosion inhibitor
Changing coolant
Cleaning the cooling system
Air cleaner
Reading the vacuum indicator
Renewing the filter element
Filter with a non-renewable element
Renewing the safety cartridge
Fuel system
Checking fuel level
Renewing the fuel filter
Renewing and bleeding double, commutative fuel filters
Renewing the water separating fuel filter
Bleeding the fuel system
Miscellaneous
Checking the drive belt
Checking for leaks
Checking and adjusting the valve clearance
Diesel
Composition of the fuel
Sulphur content of fuel
Using DMX and DMA fuels in marine engines
Temperature dependency of the fuel
Preparing the engine for storage
Handling the engine
Preservative coolant
Preservative fuel
Preservative oil
Preparations for storage
Technical data
General data
Lubrication system
Injection system
Cooling system
Intake system
Electrical system
Scania Assistance